king St. Archives - Womens Post

What's Hot July 7, 2017

King St. Pilot Study approved by city council

Thursday evening, Toronto city council approved the one-year King St. Pilot Study, with an amendment to allow an exemption for taxis during the hours of 10 p.m. and 5 a.m.

There was quite a bit of debate from councillors surrounding this exemption, as well as the $1.5 million price tag of the project. But, after four hours of debate, the plan was approved 35 to 4.

The pilot will cover six kilometres of King St., from Jarvis to Bathurst. The corridor would funnel drivers to parallel east-west routes like Queen St., Richmond, Adelaide, Wellington, or Front, while still allowing local drivers to access the street for short periods of time.

The plan allows local residents to drive on King St., but only between intersections. These vehicles must turn right at the next traffic signal. Physical barriers will be used to prevent vehicles other than the streetcars from passing through the intersection.

There is also going to be designated spaces for short-term loading, deliveries, and taxis, something business owners indicated was a necessity.

courtesy of the city of toronto

Now, with this added amendment, taxis will be able to pass through intersections during the designated time slots. This exemption only applies to licensed cabs and not ride-sharing services like Uber.

City staff argued against the exemption, saying it has the potential to confuse drivers and that traffic is still heavy on King St. in the early hours of the morning. In fact, they said it could undermine the transit-first mentality of the study.

Regardless of the warnings, council choose to adopt the exemption anyway (although they limited the hours to the evening/early morning) to help relieve the nightlife crowding along the corridor.

The pilot will be implemented in the fall.

#TOpoli June 12, 2017

Transit-first King St. pilot moves forward

Next week, Toronto’s executive committee will vote on the proposed King St. Pilot, the first plan to enact a transit-first mentality to city planning.

The King. St. Pilot is a direct response to slow transit service and increased congestion along the downtown corridor. “King Street is not currently working well for transit,” a report prepared by Toronto’s General Manager said. “Streetcar service can be slow, unreliable, and erratic, with unpredictable travel times, especially during rush hours, but also during some late evening and weekend times. People end up having to plan for their slowest trip.”

With more than 65,000 daily TTC riders compared to the 20,000 vehicle users along King St., re-branding this corridor as transit-first makes a lot of sense.The pilot will cover six kilometres of King St., from Jarvis to Bathurst. The corridor would funnel drivers to parallel east-west routes like Queen St., Richmond, Adelaide, Wellington, or Front, while still allowing local drivers to access the street for short periods of time.

Earlier suggestions of creating a car-free roadway were dismissed, as there are a number of driveways and parking garages that must be accessed from King St. However, city staff came up with a solution that would allow drivers to access King St. without bottling traffic.

Local residents may drive on King St., but only in between intersections. At each traffic sign, cars must turn left. It will be up to the drivers to decide how best to reach their destination. This will allow for significantly less cars on the roads and for the King. St. streetcars to have unobstructed access to their own lane.

King St. Pilot — Photo courtesy of City of Toronto.

Other features of the plan include dedicated pick-up and drop off areas and designated delivery areas. There will be no dedicated cycling lanes.

The last reported cost for this project was estimated to be at $1.5 million, but it has since been determined the project is eligible for funding under Phase I of the Public Transit Infrastructure Fund. This means it’s possible to get 50 per cent of funding from the federal government, leaving the city to come up with the remaining 50 per cent.

The Toronto Transit Commission will vote on the pilot program prior to the executive committee vote. If all goes well, it will be discussed in the July city council meeting.

What do you think of the King St. Pilot? Let us know in the comments below!

Toronto February 15, 2017

King St. redesign plans put transit first

King Street is not only one of the busiest inner-city roads in Toronto, it is one of the most hectic routes in the entire country. When rush-hour hits at the end of a busy work day, walking is often faster than commuting on public transit on this street and it leaves many transit users extremely frustrated.

Luckily, the City of Toronto is taking steps to redesign King St. and make it more transit friendly. The project was announced at the Transit Alliance’s Green Cities breakfast last month.

On Monday, Chief Planner Jennifer Keesmaat and the Toronto planning division presented three possible options in a public consultation that was widely attended by King St. commuters. The improvements are focused around access, reliability, and speed. The project would affect King St., from Dufferin St. to River St., and is set to cost about $200,000.

The first option to focus on transit on King St. is called “Separated Lanes”. This would separate the streetcars from the vehicles by providing one lane for each going northbound and southbound. This is the least popular choice so far because it would continue to allow thorough traffic for vehicles, but only having one lane would slow car commuters substantially. This option also wouldn’t give more room to pedestrians and bike lanes wouldn’t be constructed.

The second option, which has been dubbed the favourite of the planning division, is called “Alternating Loops”. This would include a dedicated transit lane for the streetcars and an alternating lane for vehicles to have one-way access, and would change every block. This alternative would allow for the lane that isn’t being used for one-way car traffic to have pedestrian access and a dedicated cycling lane. The one-way alternating street would also give delivery vehicles and taxis access to King St., but the vehicle would be forced to turn at the end of the block.

The last possibility is called “Transit Promenade” and would focus on pedestrians with widened sidewalks down the entire stretch on King St. The streetcars and vehicles would continue to be mixed mid-block, but thorough access would be forbidden. Vehicles could travel down the street mid-block and would have to turn right at the end of each block. This would allow for pedestrians and cyclists to consistently access the roadway.

Once the public consultations are complete and a specific plan is chosen, Keesmaat and the planning division will seek city council approval in July and would begin a pilot project in the fall. Currently Keesmaat pointed out that cars are given 64 per cent of the road on King St. and only move 16 per cent of Toronto commuters, which is not simply not logical. The city will also complete a ‘modelling study’ while they complete the public consultations, which will monitor traffic on nearby routes to ensure that the plan to redesign King St. doesn’t cripple commutes in other parts of the busy downtown area.

Redesigning King St. to become more focused on transit users and pedestrians will get people moving in a way that doesn’t put vehicles first. This is better for the environment, moving mass amounts of people, and is the best way to get everyone home at the end of the day. It will be exciting to walk down King St. after the pilot project is launched, whichever option is chosen.